Kitchen Floor Cabinets
Floor cabinets include a solid back, bottom, two ends, a top rail and a shelf all cut from 16mm MDF White Melamine board.
Wall Unit and Pantry Cabinets
Kitchen Wall cabinets generally include a solid back, a bottom, a top, two ends and an adjustable shelf all cut from 16mm High Moisture Resistant White Melamine board. All exposed edges are covered using a 2mm thick vinyl or PVC edge strip. All kitchen cabinets are supplied pre-drilled and pre-edged ready for assembly. All hardware required to build the kitchen cabinet including screws, cams and cam fittings, also leg are supplied and will be delivered. Most kitchen cabinets can be cut to a custom size. Cabinets are sold carcase only or with a selection of door types.
Kitchen Drawer Cabinets
Drawer cabinets include a solid back, bottom, two ends and a top rail all cut from 16mm MDF White Melamine board. The drawers include the Drawer bottoms, backs, runners and front clips.
Kitchen Wall Corner Cabinets
Wall corner cabinets include a solid left & right back, bottom, top, two ends and a shelf all cut from 16mm MDF White Melamine board.
Kitchen under bench Oven Cabinets
Under bench Oven cabinets include a bottom, (for oven to sit on) two ends, top front rail and solid back all cut from 16mm MDF White Melamine board.
Kitchen Wall Oven Cabinets
Wall Oven cabinets include a bottom, (for oven to sit on) two ends, top front rail and a solid back all cut from 16mm MDF White Melamine board.
Door handles are included. Doors are predrilled for hinges. Doors are edge stripped with 2mm vinyl or PVC edge strip.
Bench tops are constructed using post formed High Pressure Laminate bonded with waterproof and heat resistant contact glue to a waterproof substrate of 16mm MDF.
Laminated or Black Vinyl Kickboards on a substrate of 16mm MDF Board.
Benchtops and bases are sold separately.
• Upper Cabinets
• Base Cabinets
• Under-Sink Cabinets
• Waste bins and Recycling Centers
• Corner Cabinets
• Drawer Organization are also extra products.
720mm high x 550mm deep x 600mm wide
To have Floor Cabinets cut to a custom size enter the following information into the "Custom Box" for each cabinet that needs to be customised. The cabinet to be customised must be purchased as a standard cabinet.
a)Enter the Cabinet Name
b)Enter the size the cabinet needs to be. The custom size must be smaller than the standard size of the cabinet that has been purchased.
c)Enter the number of cabinets to be customised into the "Qty Box"
d)The door will be automatically cut to suit the cabinet and the cost is included in the cost to customise the cabinet.
e)Corner cabinets, Oven cabinets, Drawer cabinets and Open cabinets cannot be cut to size.
• Countertops and Accessories
• Hoods and Ventilation
• External Storage